DSC-1550

1. ARMING ERROR

An error tone will sound if the system is unable to arm. This will happen in the system is not ready to arm, (a door is open or movement in front of a motion detector) or if an incorrect user code has been entered. If this happens press the (#) and try again.


NOTE: Any time you press the * and any other number you will need to press the # to return to normal operation. Also if an error is made when entering your code press the # to clear it out and return to normal. If the keypad is beeping press the # to silence.

 

2. BYPASS A ZONE

To bypass any zone press *1 then the two digit zone number then #.

(example: *1 01 #, to bypass zone 1)

The bypass indicator should remain on. After you arm and disarm the system the bypass will clear.

 

3. CHIME

Press and hold the CHIME button on the right to turn the CHIME feature ON and OFF.

 

4. CODES

Press * then 5, then your master code, then the two digit number of the user number that you wish to add or change.  Then enter the new 4 digit code. (example:  *5 - master code - user number (2-6) - new code - #)

There are 6 user codes available and the master code is in position 1.  To change the master code press *5 current code, then 1, then the new code and #.   (example: *5 - master code - 01- new code - #)

To erase a code press *5, enter the master code, enter the user number you wish to delete, press the (****), 4 times and then press #.

 

5. DISARMING ERROR

If you enter an incorrect code the system will not disarm, press the (#) and enter the correct code.

 

4. FALSE ALARM

If the alarm was accidental, enter your Access Code to silence the alarm, then call your monitoring station to avoid a dispatch.

 

5. INSTANT ARM

Press * then 9 and enter your code to arm the system without any entry delay time.

NOTE: This has no effect on the exit time delay. (When using the *9 Instant arm you will still have whatever exit time to leave, but there will not be any entry time delay.)

 

6. MEMORY

When an alarm occurs the Memory indicator will turn on, To view which zone caused the alarm press the * then 3. When finished press # to return to normal.

 

7. SMOKE DETECTOR RESET

Press and hold the RESET button on the right.

 

8. TROUBLE

When a trouble condition is detected the Trouble indicator will turn on and the keypad will beep every 10 seconds. Press the # to silence the beeps. Press the * then 2 in order to view the trouble condition, each zone indicates a different problem. Below are the trouble conditions by number which they will appear on the touch pad.

NOTE:  When viewing the trouble condition on an LED touch pad the zone lights will light up to indicate the trouble.  If you are viewing the trouble on an LCD touch pad the trouble will read out on the screen.

9. USER FUNCTIONS/TIME AND DATE

(example: *6 - master code - 1 - HH-MM-MM-DD-YY - #)

Press the * then 6, enter the master code, press 1 then the time; HOURS, MINUTES, MONTH, DAY and YEAR. Then #. Time should be entered in Military format. EXAMPLE: *6 master code -1-10-05-03-01-06 - # (10:05 am March 01, 2006) for 10:05 PM enter 22-05-03-01-06)

**If you have the LCD touch pad, press the * then 6, enter your master code then use the < > to TIME AND DATE. Press * to select then change the time. Press # to return to normal.